Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Nexperia
	Logic Family	74HCT
	Logic Function	D Type
	Number of Elements per Chip	1
	Number of Channels per Chip	8
	Polarity	Non-Inverting
	Mounting Type	Surface Mount
	Package Type	SO
	Pin Count	20
	Dimensions	13 x 7.6 x 2.45mm
	Minimum Operating Temperature	-40 °C
	Minimum Operating Supply Voltage	4.5 V
	Maximum Operating Supply Voltage	5.5 V
	Height	2.45mm
	Length	13mm
	Width	7.6mm
	Maximum Operating Temperature	+125 °C

	Select all
	Brand Nexperia
	Logic Family 74HCT
	Logic Function D Type
	Number of Elements per Chip 1
	Number of Channels per Chip 8
	Polarity Non-Inverting
	Mounting Type Surface Mount
	Package Type SO
	Pin Count 20
	Dimensions 13 x 7.6 x 2.45mm
	Minimum Operating Temperature -40 °C
	Minimum Operating Supply Voltage 4.5 V
	Maximum Operating Supply Voltage 5.5 V
	Height 2.45mm
	Length 13mm
	Width 7.6mm
	Maximum Operating Temperature +125 °C

The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Low switch leakage

Nexperia 74HCT373D,652, 1 D Type Latch, 8-Bit Non-Inverting, 20-Pin SOIC

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Related links