Stego Elektrotechnik, Enclosure Thermostat, Adjustable, NC, DIN Rail, 120 → 250 V ac

  • RS Stock No. 697-4437
  • Mfr. Part No. 01140.0-00
  • Manufacturer STEGO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Stego Compact DIN Rail Thermostats

KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.

Large setting range
Small size 60 x 33 x 43 mm
Plastic casing according to UL94 V-0, light grey
Variable fitting position and simple to mount (clip for 35mm DIN rail)
Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W
Switch temperature difference 7K (±4K)
Thermostatic bimetal sensor element
Contact resistance <10mΩ
Service life >100,000 cycles
EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection 2-pole terminal for 2.5mm2

,

clamping torque 0.8Nm
Operating/storage temperature -20 to +80°C/-45 to +80°C
IP20

Standards

VDE (697-4437 & 697-4446)
UL, VDE, CSA (121-7322 & 121-7323)

Approvals

VDE

Approvals

VDE

Specifications
Attribute Value
Adjustable or Fixed Adjustable
Mount Type DIN Rail
Maximum Temperature Setting +60°C
Minimum Temperature Setting 0°C
Supply Voltage 120 → 250 V ac
Switch Configuration NC
Temperature Setting Range 0 → +60°C
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
$ 20.23
(exc. GST)
$ 23.26
(inc. GST)
units
Per unit
1 - 9
$20.23
10 - 24
$19.88
25 - 49
$19.51
50 - 99
$19.13
100 +
$18.81
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting platePTC technology with ...
Tamperproof thermostats are pre-set and cannot be tampered ...
Description:
Tamperproof thermostats are pre-set and cannot be tampered with, so it is impossible to have the incorrect setting. Installation is simple and quick by screw terminals (up to 2,5mm²) and using a din-rail clip feature. Two (dual) tamperproof thermostats in ...
This thermostat of temperature class T6 (85 °C ...
Description:
This thermostat of temperature class T6 (85 °C max.) is utilised for the regulation of heaters deployed in areas with explosion hazard. The high switching performance allows direct control of a heater. Compact, small mechanical thermostat offering a high response ...
The electronic thermostat with integrated switch module is ...
Description:
The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external ...