RS PRO Surface ESD Tester

  • RS Stock No. 776-8318
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Analogue Surface Resistance Test Kit

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 10 ohms.

Analogue compliance verification surface resistance checker
Automatic test range voltage selection compliance verification required by EN 61340-5-1
Portable operation with 9 Volt battery
LED Illuminates when battery power is low

Supplied with

1 Analogue surface resistance meter, 1x 9V alkaline battery, 2 shielded test leads, 2x 2.27 kilograms electrodes, 1 plastic Carrying Case, 1 certificate of calibration

RS Pro Surface ESD Tester Description

The Analogue Surface Resistance Test Kit is a portable battery-powered instrument designed to measure resistance point-to-point (Rp-p) and surface to ground (Rg). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 105 ohms.

ESD protected area products should be tested:
A. Prior to installation to qualify for listing in user’s ESD control plan. Approved ESD materials (see product qualification EN-61340-5-1 Table 3 - EPA Requirements)
B. During initial installation
C. For periodic checks of installed products as part of EN-61340-5-1 Compliance Verification testing per Table 3 - EPA Requirements.

Contents

1 x Analogue Surface Resistance Meter
1 x 9V Alkaline Battery
2 x Shielded Test Leads
2 x 2.27 kilograms Electrodes
1 x Plastic Carrying Case
1 x Certificate of Calibration

Specifications

Accuracy: +/- 1/2 decade
Meter: 0.2 kg
Kit: 5.4 kg
Meter: 11.4cm L x 7.1cm W x 5.3cm H
Plastic Carrying Case: 24.1cm L x 30.5cm W x 8.9cm H
Power Supply: 9V alkaline battery

Specifications
Attribute Value
Equipment Type Analogue Surface Resistance Test Kit
Power Source Battery
Test Point Surface
Supply Voltage 9V
Depth 241mm
Height 89mm
Width 305mm
Display Type Analogue
Complies with EN 61340-5-1 Yes
4 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 1,437.73
(exc. GST)
$ 1,653.39
(inc. GST)
units
Per unit
1 +
$1,437.73
Related Products
3-state touch tester designed for fast, frequent testing ...
Description:
3-state touch tester designed for fast, frequent testing of ESD personnel grounding devices. Incorporates unique dual test circuit design which improves accuracy and eliminates need for separate wrist strap and foot grounder test units. Equipped with 750 kΩ → 35 ...
Designed to simplify the process of calibrating the ...
Description:
Designed to simplify the process of calibrating the Combo Wrist Strap Footwear Testers 685-8745 & 685-8754. Allows user to quickly and easily verify whether tester operating within specifications. Passive device requiring no power source. Manufactured with industry-accepted test ranges for ...
The Desco EMIT digital static field meter is ...
Description:
The Desco EMIT digital static field meter is a high-quality, portable, non-contacting static field meter which provides accurate readings consistently. This indicates surface voltage and polarity on objects. This portable electrostatic meter includes optical distance indicator, HOLD button, auto-ranging and ...
Use for periodic verification of ionizers per ANSI/ESD ...
Description:
Use for periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53Measure offset voltage (balance) and discharge times. Charger applies ± polarity charge to conductive plate. Economical option when the Charged Plate Analyzer is not required.