Rittal Fan Filter for 292 x 292 mm, 323 x 323 mm Fans, Chemical Fibre Filter, 289 x 289mm

Use this filter from Rittal in your air conditioning and ventilation fans. It's made of a chemical-based material and constructed into a mat with chopped fibres for high absorbency. The open structure on the intake side allows air to flow through, while the closed structure on the other side filters out particles as small as 10μm (micrometres). This makes it a reliable way of providing good ventilation while preventing small particles, such as pollen, lint and cement dust, from entering rooms and enclosures. Use it on devices such as industrial power distribution units and communications cabinets.

• Temperature-resistant up to +100°C for use in high-temperature environments
• Air throughput between 105m³/h (cubic metres per hour) and 120m³/h for maximum ventilation
• IP54 (ingress protection) rating means it's protected against contamination from limited amounts of dust and other particles

• Industrial and IT enclosures
• Electronics packaging
• Climate control systems

It's recommended that you change the fan filter at least every 2,000 operating hours. However, the level of dust exposure can increase or decrease over time, so it's best to check your filter at regular intervals and replace it as needed.