Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

RS Stock No.:: 178-2970
Mfr. Part No.:: SP000063855
Brand:: Broadcom

Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

This image is representative of the product range

Bulk discount available

View bulk pricing options

Subtotal (1 tube of 125 units)*

$2,901.125

(exc. GST)

$3,336.25

(inc. GST)

Stock information currently inaccessible - Please check back later

Units	Per unit	Per Tube*
125 - 125	$23.209	$2,901.13
250 - 375	$22.628	$2,828.50
500 +	$22.28	$2,785.00

*price indicative

RS Stock No.:: 178-2970
Mfr. Part No.:: SP000063855
Brand:: Broadcom

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Broadcom
	Product Type	Fibre Optic Receiver
	Maximum Data Rate	5MBd
	Connector Shape	Round
	Wavelength of Peak Sensitivity	700nm
	Typical Rise Time	14ns
	Typical Fall Time	4ns
	Number of Pins	5
	Mount Type	Through Hole
	Connector Type	Push In Collet
	Standards/Approvals	No
	Length	24.2mm
	Width	9.2mm
	Height	9mm
	Output Signal Type	TTL
	Series	SFH

	Select all
	Brand Broadcom
	Product Type Fibre Optic Receiver
	Maximum Data Rate 5MBd
	Connector Shape Round
	Wavelength of Peak Sensitivity 700nm
	Typical Rise Time 14ns
	Typical Fall Time 4ns
	Number of Pins 5
	Mount Type Through Hole
	Connector Type Push In Collet
	Standards/Approvals No
	Length 24.2mm
	Width 9.2mm
	Height 9mm
	Output Signal Type TTL
	Series SFH

Datasheet

Broadcom SFH Series Fibre Optic Receiver, 24.2mm Length, 5 Pins - SP000063855

This Fibre optic receiver converts optical signals into TTL electrical outputs for use in electronic assemblies. It is intended for through-hole mounting and is suitable where a Compact optical-to-digital Interface is required. The device is optimised for operation around a visible near-red Wavelength and supports moderate data-rate transmission for control and detection tasks.

Features and Benefits:

• TTL output simplifies direct digital interfacing
• Peak sensitivity at 700nm for near-red detection
• Typical rise time 14ns for Rapid signal acquisition
• Typical fall time 4ns for fast signal clearance
• Maximum data rate 5MBd for moderate-speed links
• Five-pin configuration enables straightforward connectivity

Applications

• Suitable for inline optical-to-digital sensor modules
• Ideal for control signalling in automation systems
• Used with optical transmitters operating near 700nm
• Can be used for short-range serial optical links
• Suitable for PCB-mounted detection in equipment panels

What mounting method does it require?

It is designed for through-hole mounting to secure it to a PCB.

How is the optical Fibre attached?

A round connector with a push-in collet secures the Fibre end for alignment.

How many electrical connections are provided?

The device uses a five-pin electrical Interface for power and signal lines.

What output logic level should the receiving circuit expect?

The detector produces a TTL-compatible digital output signal.

Which physical profile may assist low-height installations?

The receiver presents a low-profile height suitable for constrained vertical spaces.