Pegler Yorkshire, High Pressure, Float Valve, 1/2in

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Float Valve-BS1212: Part2

WRC approved
Rubber diaphragm
Discharge above overflow level prevents back siphonage - meets requirements of Byelaw 42
No hiss or prolonged shut-off noise
Thumbscrew on lever provides vertical and horizontal adjustment of float
Designed for use with a 4 1/2 in plastic float
Pressure rating 14 bar

Standards

BS 1212 Part 2

Float Valves

These Float Valves are suitable for pressures up to 14 bar (206 psi).

Specifications
Attribute Value
Type High Pressure
Compatible Float 1 4-1/2 in Plastic
Connection Size 1/2in
Lever Thread Size 5/16in
Maximum Working Pressure 14 bar
Compatible Float Diameter 1 4-1/2in
Float Material 1 Plastic
115 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 15.62
(exc. GST)
$ 17.96
(inc. GST)
units
Per unit
1 - 4
$15.62
5 - 9
$15.24
10 +
$14.86
Related Products
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per secondSuitable for use with water or compressed airCan be installed in any position and serviced in situSingle ...