Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

RS Stock No.:: 217-7103
Distrelec Article No.:: 304-22-790
Mfr. Part No.:: 14CE1-Q
Brand:: Honeywell

Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

Subtotal (1 unit)*

$407.15

(exc. GST)

$468.22

(inc. GST)

Stock information currently inaccessible - Please check back later

Units	Per unit
1 +	$407.15

*price indicative

RS Stock No.:: 217-7103
Distrelec Article No.:: 304-22-790
Mfr. Part No.:: 14CE1-Q
Brand:: Honeywell

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP66, IP65, IP67, IP68
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	5A
	Series	14CE
	Switching AC Voltage	250V
	Minimum Operating Temperature	0°C
	Switching DC Voltage	28V
	Maximum Operating Temperature	70°C
	Standards/Approvals	CE, EN 60947-5-1
	Width	44mm
	Depth	44mm
	Length	16mm
	Hazardous Area Certification	NO
	Mounting Orientation	Side
	Operating Force	11.8N
	Conduit Entry	20 mm
	Mechanical Life	10000000Cycles

	Select all
	Brand Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP66, IP65, IP67, IP68
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 5A
	Series 14CE
	Switching AC Voltage 250V
	Minimum Operating Temperature 0°C
	Switching DC Voltage 28V
	Maximum Operating Temperature 70°C
	Standards/Approvals CE, EN 60947-5-1
	Width 44mm
	Depth 44mm
	Length 16mm
	Hazardous Area Certification NO
	Mounting Orientation Side
	Operating Force 11.8N
	Conduit Entry 20 mm
	Mechanical Life 10000000Cycles

Honeywell 14CE Series Limit Switch, 20mm Conduit Entry, Top Pin Plunger Actuator Type - 14CE1-Q

This limit switch is a compact, mechanically actuated device designed to detect position changes and provide reliable switching in industrial control systems. It is intended for gang mounting and offers snap-action contact operation with a top-mounted plunger actuator, suitable for environments requiring robust enclosure protection and routine switching of electrical loads.

Features and Benefits:

• Die-cast zinc housing delivers resilient enclosure protection
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response

Applications

• Suitable for conveyor end-of-travel detection in automation lines
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required

What electrical loads can it handle?

It switches AC loads up to 250V at 5A and DC loads up to 28 V, using a snap-action contact design suitable for typical control and signalling circuits.

How is the unit connected on-site?

Termination is via cable entry using a 20mm conduit interface, allowing straightforward field cabling and gland installation.

What temperature range is supported during operation?

The switch is designed to operate between 0 °C and 70 °C, accommodating common industrial ambient conditions.

Are there recognised standards applicable to its safety and performance?

It complies with EN 60947-5-1 and carries the CE designation, reflecting conformance to relevant European switch performance requirements.