STMicroelectronics L6362ATR, Line Transceiver, 7 → 36 V, 12-Pin VFDFPN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment.

Fully protected
Reverse polarity
Overload with cut-off function
Overtemperature
Undervoltage and overvoltage
GND and VCC open wire
-40 to +125 °C operating ambient temperature
Selectable output stages:high-side, low-side, push-pull
Suitable to drive L, C and R loads
30 μF output load drive capability
Switching capability of inductors up to 500 mJ
Wake-up detection supported
Fast demagnetization of inductive loads

Specifications
Attribute Value
Number of Transmitters 1
Package Type VFDFPN
Mounting Type Surface Mount
Pin Count 12
Number of Receivers 1
Typical Single Supply Voltage 7 → 36 V
Number of Transceivers 1
Transmitter Signal Type Single Ended
Receiver Signal Type Single Ended
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Dimensions 3 x 3 x 0.95mm
Power Supply Type Single
Length 3mm
Width 3mm
Height 0.95mm
1215 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 5)
$ 4.554
(exc. GST)
$ 5.237
(inc. GST)
units
Per unit
Per Pack*
5 +
$4.554
$22.77
*price indicative
Packaging Options:
Related Products
Controller Area Network (CAN or CAN-bus) is a ...
Description:
Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also ...
Linear Technology RS232 Transceiver and Line driver/receivers provide ...
Description:
Linear Technology RS232 Transceiver and Line driver/receivers provide a range of single ended configurations. The data transmission RS232 is also known as TIA-232 supplies serial interface data rates up to 10 Mbps. The RS232 standard states the electrical characteristics and ...
The NMTTLD6S5MC is a low power electrically isolated ...
Description:
The NMTTLD6S5MC is a low power electrically isolated TTL data transmission device. No external components are needed as a single 5V supply powers all functions either side of the isolation boundary. NMTTLD655MC also provides a regulated 5V, unregulated 6V and ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...