Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- RS Stock No.:
- 724-4660
- Mfr. Part No.:
- A1120LUA-T
- Manufacturer:
- Allegro Microsystems
This image is representative of the product range
Price (ex. GST) Each (In a Pack of 5)
$3.18
(exc. GST)
$3.66
(inc. GST)
| units | Per unit | Per Pack* |
| 5 - 120 | $3.18 | $15.90 |
| 125 - 245 | $3.124 | $15.62 |
| 250 + | $3.068 | $15.34 |
| *price indicative | ||
- RS Stock No.:
- 724-4660
- Mfr. Part No.:
- A1120LUA-T
- Manufacturer:
- Allegro Microsystems
Legislation and Compliance
Product Details
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply
Hall Effect Sensors, Allegro MicroSystems
Specifications
| Attribute | Value |
| Sensor Type | Hall Effect Sensors |
| Mounting Type | Through Hole |
| Magnetic Type | Unipolar |
| Maximum Operating Supply Voltage | 24 V |
| Minimum Operating Supply Voltage | 3 V |
| Package Type | SIP |
| Pin Count | 3 |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Temperature | -40 °C |