IDEM RM-Ex Series Magnetic Non-Contact Safety Switch, 250V ac/dc, 316 Stainless Steel Housing, 2NC, 10m Cable

RS Stock No.:: 826-4325
Mfr. Part No.:: 905102
Brand:: IDEM

IDEM RM-Ex Series Magnetic Non-Contact Safety Switch, 250V ac/dc, 316 Stainless Steel Housing, 2NC, 10m Cable

Subtotal (1 unit)**

$764.16

(exc. GST)

$878.78

(inc. GST)

4 In stock for delivery within 7 working day(s)*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over $80 ex GST

Units	Per unit
1 +	$764.16

**price indicative

RS Stock No.:: 826-4325
Mfr. Part No.:: 905102
Brand:: IDEM

IDEM Explosion Proof Non Contact Safety Switches

Developed to satisfy the latest IECEx and ATEX standards, the IDEM range of non-contact safety interlock switches provide explosion proof switching for hazardous conditions created within the petro-chemical, pharmaceutical, food processing and packaging industries. Made from stainless steel 316, these safety switches have been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors.
In addition to explosion proof switching and depending upon the risk assessment for the application, the CM3-Ex, RM-Ex and WM1-Ex series, can also be used in combination with any dual channel safety monitoring relays to provide high functional safety up to Category 4 and PLe ISO13849-1 or SIL3 EN62061.
The magnetic sensing of these safety switches provides a wide sensing distance and high tolerance to misalignment after sensing.

Explosion proof protection and high functional safety in one device
Electrical switching elements fully encapsulated
Stainless steel 316 housing
High temperature stability up to 80°C
High tolerance to guard misalignment
Resistance to many organic and inorganic chemicals
IP67 protection
Resistant to high temperature hosing and detergent wash down
Functional safety up to PLe ISO13849-1

CM3-Ex Safety Switch

II 2G Ex mb IIC T6 Gb
II 2D Ex mb IIIC T80 Db IP67
Zones1, 21, 2, 22 gas and dust
Supplied fitted with PVC cable
2NC / 1 NO
12mm wide sensing
55mm fixing centres
Housing: 20.6 x 85 x 17mm

RM-Ex Safety Switch

II 2G Ex mb IIC T6 Gb
II 2D Ex mb IIIC T80 Db IP67
Zones1, 21, 2, 22 gas and dust
Supplied fitted with PVC cable
2NC / 1 NO
10mm wide sensing
Housing: 60 x Ø30mm (M30x1.5mm threaded body)

WM1-Ex Safety Switch

II 1G Ex ma IIC T6 Ga
II 1D Ex ma IIIC T80 Da IP67
Zones 0, 20, 1, 21, 2, 22 gas and dust
Supplied fitted with stainless steel flexible conduit
2NC / 1 NO
12mm wide sensing
62mm fixing centres
Housing: 31.5 x 84.5 x 16.5mm

Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

IEC, IECEx, Ex, ATEX.

Attention: This item is permanent magnet (or contains magnetized materials) which needs to be shipped by sea freight. There will be extension of lead time (around 90 days) for global stock.

Attribute	Value
Supply Voltage	250V ac/dc
Safety Contacts	2NC
Housing Material	316 Stainless Steel
Connection Type	10m Cable
Actuator Type	Magnetic
Auxiliary Contacts	NO
Sensor Principle	Magnetic
Safety Category	4
Actuator Included	Yes
Switching Distance	10 (Close) mm, 22 (Open) mm
Series	RM-Ex
IP Rating	IP67
Supply Current	Safety Channels 600 mA, Auxiliary Channel 200mA
Hazardous Area Certification	ATEX
Width	30mm
Length	60mm
Number of Approach Directions	1