onsemi FUSB302BVMPX High Side 1, USB Power Power Switch IC 14-Pin, WQFN
- RS Stock No.:
- 178-4411
- Mfr. Part No.:
- FUSB302BVMPX
- Brand:
- onsemi
This image is representative of the product range
Stock information currently inaccessible
Alternative
This product is not currently available. Here is our alternative recommendation.
Each (On a Reel of 3000)
$6,897.00
(exc. GST)
$7,931.55
(inc. GST)
- RS Stock No.:
- 178-4411
- Mfr. Part No.:
- FUSB302BVMPX
- Brand:
- onsemi
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Power Switch Type | USB Power | |
| Number of Outputs | 1 | |
| Number of Inputs | 1 | |
| Interface Type | USB Type C | |
| Mount Type | Surface | |
| Package Type | WQFN | |
| Maximum Supply Voltage | 21V | |
| Pin Count | 14 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | Pb Free, AECQualified, PPAP capable, Halide Free | |
| Width | 2.5mm | |
| Length | 2.5mm | |
| Height | 0.72mm | |
| Automotive Standard | AEC-Q100 | |
| Series | FUSB302B | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Power Switch Type USB Power | ||
Number of Outputs 1 | ||
Number of Inputs 1 | ||
Interface Type USB Type C | ||
Mount Type Surface | ||
Package Type WQFN | ||
Maximum Supply Voltage 21V | ||
Pin Count 14 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals Pb Free, AECQualified, PPAP capable, Halide Free | ||
Width 2.5mm | ||
Length 2.5mm | ||
Height 0.72mm | ||
Automotive Standard AEC-Q100 | ||
Series FUSB302B | ||
- COO (Country of Origin):
- TH
The FUSB302B targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability. The FUSB302B enables the USB Type-C detection including attach, and orientation. The FUSB302B integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.
Dual-Role Functionality with Autonomous DRP Toggle
Ability to connect as either a host or a device based on what has been attached.
Software configurable either as a dedicated host, dedicated device, or dual role.
Attach/Detach Detection as Host
Current Capability Indication as Host
Current Capability Detection as Device
Audio Adapter Accessory Mode
Debug Accessory Mode
Active Cable Detection