John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
- RS Stock No.:
- 706-8586
- Mfr. Part No.:
- MTL10/PD
- Brand:
- John Drummond
Unavailable
RS will no longer stock this product.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
$438.84
(exc. GST)
$504.67
(inc. GST)
- RS Stock No.:
- 706-8586
- Mfr. Part No.:
- MTL10/PD
- Brand:
- John Drummond
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | John Drummond | |
| Test Current Rating | 3.5mA | |
| Output Voltage | 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc | |
| Power Source | Mains | |
| Dimensions | 213 x 112 x 72mm | |
| Weight | 320g | |
| Height | 72mm | |
| Length | 213mm | |
| Maximum Operating Temperature | +55°C | |
| Minimum Operating Temperature | -10°C | |
| Width | 112mm | |
| Select all | ||
|---|---|---|
Brand John Drummond | ||
Test Current Rating 3.5mA | ||
Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc | ||
Power Source Mains | ||
Dimensions 213 x 112 x 72mm | ||
Weight 320g | ||
Height 72mm | ||
Length 213mm | ||
Maximum Operating Temperature +55°C | ||
Minimum Operating Temperature -10°C | ||
Width 112mm | ||
RoHS Status: Exempt
- COO (Country of Origin):
- PH
Drummond MTL10 Test Lamp and Proving Unit Safety Kit
Voltage level indicator & proving unit safety kit comprising:
MTL10 Drummond Test Lamp
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
PD440 Proving Unit:
Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)
Supplied with
Handy carry case, right angled probe tip, two straight tips and instructions
Mains Voltage Indicators - Contact
Related links
- John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc 200 V ac/dc Kit
- John Drummond DRUMTL10 500V ac/dc CAT III 1000V
- John Drummond DRUMTL20 500V ac/dc CAT III 1000V
- Proving Units
- Fluke PRV240 Proving Unit 240V ac/dc
- Werma KombiSIGN 71 Series Accessory Kit AC/DC, IP65
- Martindale PD240 Proving Unit 2mA 240V dc
- Eaton EasyE4 Series Starter Kit for Use with easySoft Relay Output Digital