Winbond DDR2 SDRAM 128 MB Surface, 84-Pin 16 bit TFBGA

Name: Winbond DDR2 SDRAM 128 MB Surface, 84-Pin 16 bit TFBGA
Brand: Winbond
SKU: 188-2580
Price: 4.44 NZD
Availability: BackOrder

This image is representative of the product range

Bulk discount available

Subtotal (1 tray of 209 units)*

$806.949

(exc. GST)

$927.96

(inc. GST)

Temporarily out of stock

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit	Per Tray*
209 - 836	$3.861	$806.95
1045 +	$3.475	$726.28

*price indicative

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Winbond
	Memory Size	128MB
	Product Type	DDR2 SDRAM
	Data Bus Width	16bit
	Address Bus Width	15bit
	Number of Bits per Word	8
	Maximum Random Access Time	0.4ns
	Number of Words	16M
	Mount Type	Surface
	Package Type	TFBGA
	Pin Count	84
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	95°C
	Length	12.6mm
	Standards/Approvals	RoHS
	Series	W9712G6KB
	Height	0.8mm
	Maximum Supply Voltage	1.9V
	Automotive Standard	No
	Minimum Supply Voltage	1.7V
	Supply Current	135mA

	Select all
	Brand Winbond
	Memory Size 128MB
	Product Type DDR2 SDRAM
	Data Bus Width 16bit
	Address Bus Width 15bit
	Number of Bits per Word 8
	Maximum Random Access Time 0.4ns
	Number of Words 16M
	Mount Type Surface
	Package Type TFBGA
	Pin Count 84
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 95°C
	Length 12.6mm
	Standards/Approvals RoHS
	Series W9712G6KB
	Height 0.8mm
	Maximum Supply Voltage 1.9V
	Automotive Standard No
	Minimum Supply Voltage 1.7V
	Supply Current 135mA

The W9712G6KB is a 128M bits DDR2 SDRAM and speed involving -25, 25I and -3.

Double Data Rate architecture: two data transfers per clock cycle

CAS Latency: 3, 4, 5 and 6

Burst Length: 4 and 8

Bi-directional, differential data strobes (DQS and /DQS ) are transmitted / received with data

Edge-aligned with Read data and center-aligned with Write data

DLL aligns DQ and DQS transitions with clock

Differential clock inputs (CLK and /CLK)

Data masks (DM) for write data

Commands entered on each positive CLK edge, data and data mask are referenced to both edges of /DQS

Posted /CAS programmable additive latency supported to make command and data bus efficiency

Read Latency = Additive Latency plus CAS Latency (RL = AL + CL)

Off-Chip-Driver impedance adjustment (OCD) and On-Die-Termination (ODT) for better signal quality

Auto-precharge operation for read and write bursts

Auto Refresh and Self Refresh modes

Precharged Power Down and Active Power Down

Write Data Mask

Write Latency = Read Latency - 1 (WL = RL - 1)

Interface: SSTL_18

Related links