LPRS, easyRadio eRIC9

  • RS Stock No. 136-7694
  • Mfr. Part No. eRIC9-DUINO
  • Manufacturer LPRS
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

eRIC4 & eRIC9 easyRadio Arduino Shields

Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board 4-pin header allows connection of an external FT232 USB adapter device to configure the easyRadio module if required.
Two versions of the eRIC Arduino Shield are available:
136-7693 · eRIC4-DUINO for operation at 434MHz
136-7694 · eRIC9-DUINO for operation at 868/915MHz

• Host Arduino™ boards can send and receive (half duplex) up to 180 Bytes of data per packet
• Seamless delivery and presentation to all other hosts within range
• Typical operating range up to 200m
• Transmit, Receive, Busy and Power LED indicators
• Integral SMA antenna connector

eRIC4 & eRIC9 Transceiver features:

• CC430F5137 SoC, MSP430-core, 32KB Flash memory, 4KB RAM
• Embedded eROS Operating System
• Carrier Frequency: 433 or 868/915 MHz ISM-Band
• Max RF Output Power: eRIC4 +12dBm, eRIC9 +7dBm
• Max RF Data Rate: 500kbps
• Max Host Data Rate: 115.2kbps
• AES-128 data encryption/decryption
• Programmable User GPIO
• Communication: serial UART with RTS/CTS handshaking
• On-board temperature sensor
• Power supply: 2.4V to 6.0Vdc
• Operating Temperature Range: -40 to +85°C
• Dimensions: 15 x 20 x 2.2mm

Wireless Modules - Low Power Radio Solutions

Specifications
Attribute Value
Product Name EasyRadio eRIC9
Kit Classification Arduino Shield
Processor Part Number ERIC9-DUINO
For Use With EasyRadio Modules
7 In stock for delivery within 7 working day(s)
Price (ex. GST) 1 Box of 1
$ 71.74
(exc. GST)
$ 82.50
(inc. GST)
Box(es)
1 +
$71.74
Related Products
The 12V Protected switch shield for Arduino comes ...
Description:
The 12V Protected switch shield for Arduino comes with BTS50015-1TAD (RDS(ON) 1.5mΩ), an ultra-low ohmic smart high-side power switch from the Power PROFET™ family. Designed for relay and fuse replacement in power distribution and junction boxes, Power PROFET™ can drive ...
Arduino Uno is the most popular Arduino board ...
Description:
Arduino Uno is the most popular Arduino board so far, however it is sometimes frustrating when your project requires a lot of sensors or Leds and your jumper wires are in a mess. The purpose of creating the Grove - ...
The Arduino Motor Shield Rev3 is the latest ...
Description:
The Arduino Motor Shield Rev3 is the latest product designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive 2 DC motors with your Arduino board, controlling the speed and direction of each ...
The RF Digital RFD22125 Proto shield allows you ...
Description:
The RF Digital RFD22125 Proto shield allows you to build your own prototype shield for the RFduino. There is a free grid area to enable you to add your own circuits; it also lets you access the 3V supply rail ...