Broadcom Solid State Relay, 0.2 A Load, PCB Mount, 600 V Load, 1.7 V Control

RS Stock No.:: 693-6918
Mfr. Part No.:: ASSR-5211-001E
Brand:: Broadcom

Broadcom Solid State Relay, 0.2 A Load, PCB Mount, 600 V Load, 1.7 V Control

This image is representative of the product range

Bulk discount available

Subtotal (1 unit)*

$8.11

(exc. GST)

$9.33

(inc. GST)

FREE delivery for orders over $60.00 ex GST

Temporarily out of stock

903 unit(s) shipping from 29 December 2025

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 - 9	$8.11
10 - 49	$7.88
50 - 99	$7.65
100 - 249	$7.43
250 +	$7.22

*price indicative

RS Stock No.:: 693-6918
Mfr. Part No.:: ASSR-5211-001E
Brand:: Broadcom

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Broadcom
	Maximum Load Current	0.2 A
	Mounting Type	PCB Mount
	Maximum Load Voltage	600 V
	Minimum Load Voltage	600 V
	Maximum Control Voltage	1.7 V
	Control Voltage Range	1.1 → 1.7 V
	Minimum Load Current	0.2 A
	Contact Configuration	SPST
	Output Device	MOSFET
	Dimensions	9.9 x 6.6 x 3.68mm
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	+85°C
	Depth	6.6mm
	Height	3.7mm
	Length	9.9mm
	Operating Temperature Range	-40 → +85°C

	Select all
	Brand Broadcom
	Maximum Load Current 0.2 A
	Mounting Type PCB Mount
	Maximum Load Voltage 600 V
	Minimum Load Voltage 600 V
	Maximum Control Voltage 1.7 V
	Control Voltage Range 1.1 → 1.7 V
	Minimum Load Current 0.2 A
	Contact Configuration SPST
	Output Device MOSFET
	Dimensions 9.9 x 6.6 x 3.68mm
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature +85°C
	Depth 6.6mm
	Height 3.7mm
	Length 9.9mm
	Operating Temperature Range -40 → +85°C

ASSR-5211 High Current, 1 Form A, Solid State Relay (MOSFET) Data Sheet

High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16Ω)

The ASSR-5211 Solid State Relay (SSR) is specifically designed for high current applications, commonly found in the industrial equipments.The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays.

The ASSR-5211 consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.

The ASSR-5211 connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. The connection B, with its advantages of reduced on-resistance and higher output current, allows the relays to switch dc loads only.

The electrical and switching characteristics are specified over the temperature range of -40°C to +85°C.

ASSR-5211, High Current, 1 Form A, Solid State Relay (MOSFET), 600V/0.2A/16Ohm)

Features

Compact Solid-State Bi-directional Signal Switch

Single Channel Normally-off

Single-Pole-Single-Throw (SPST) Relay

600V Output Withstand Voltage

0.2A or 0.4A Current Rating

Low On-Resistance: 4Ω Typical for DC-only, 16Ω Typical for AC/DC

High Speed Switching: 0.7ms (Ton), 0.07ms (Toff) Typical

High Transient Immunity: >1kV/μs

High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals)

3750 Vrms for 1 min per UL1577

CSA Component Acceptance

Applications

Industrial Controls

Factory Automation

Data Acquisition

Measuring Instrument

Medical System

Security System

EMR / Reed Relay Replacement

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Optocouplers, Avago Technologies