Parallax Inc Arlo Plastic Shaft Base Pack
- RS Stock No.:
- 843-0822
- Mfr. Part No.:
- 28960
- Brand:
- Parallax Inc
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 843-0822
- Mfr. Part No.:
- 28960
- Brand:
- Parallax Inc
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Parallax Inc | |
| Series | Arlo | |
| Structural Component Type | Plastic Shaft Base Pack | |
| Select all | ||
|---|---|---|
Brand Parallax Inc | ||
Series Arlo | ||
Structural Component Type Plastic Shaft Base Pack | ||
- COO (Country of Origin):
- US
Arlo Mobile Robot Base kit
Arlo Robot Base is a high-density polyethylene (HDPE) robotics platform, ideal for medium-sized robotics development. This rugged base platform is suitable for outdoor applications.
High Density Polyethylene (HDPE) base plate with pre-drilled and counter-sunk mounting holes
Base Plate dimensions: 450.9mm diameter x 9.5mm thick
1419 square cm of usable surface area
Hardware included for both single and double battery mounting
Battery shelf designed to carry one or two 12V, 8Ah SLA batteries
Double Battery Shelf dimensions: 177.8 x 336.6 x 9.5mm thick
Battery containment area dimensions: 66.7 x 203 x 171mm
Weight: 1.75kg
Operating temperature range: -18 to +65°C
Base Plate dimensions: 450.9mm diameter x 9.5mm thick
1419 square cm of usable surface area
Hardware included for both single and double battery mounting
Battery shelf designed to carry one or two 12V, 8Ah SLA batteries
Double Battery Shelf dimensions: 177.8 x 336.6 x 9.5mm thick
Battery containment area dimensions: 66.7 x 203 x 171mm
Weight: 1.75kg
Operating temperature range: -18 to +65°C
Supplied with
Mounting screws and standoffs, ball-end hex key, screwdriver
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
The Arlo Robotic System provides the basic hardware to build a mid-size robotics platform ideal for telepresence and autonomous robots. The format is one of a two-wheeled buggy with castors fore and aft. The user can then attach the processor board, motor control boards and sensor/actuator modules to suit their application.