Common Mode Chokes | CM Choke Filters | RS
Recently searched

    Common Mode Chokes

    Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.

    RS have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.

    Why use common mode chokes?

    Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.

    Things to consider before purchasing a common mode choke:

    • Impedance
    • Frequency bandwidth
    • Current handling

    Typical Applications include:

    Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:

    • Data storage systems
    • Digital video camera
    • Industrial systems
    • Professional audio

    1423 Products showing for Common Mode Chokes

    KEMET
    1.3 mH
    SSRH7HS-M
    -
    10 kHz
    80mΩ
    2 A
    18 x 14.5 x 12mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    Murata
    -
    DLM0Q
    65 Ω
    100 MHz
    3.6Ω
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    8 mH
    SU-9V
    -
    1 KHz
    200 mA
    17 x 11 x 17mm
    -25°C → +80°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    KEMET
    16.9 mH
    SSRH7H-M
    -
    10 kHz
    560mΩ
    800 mA
    18 x 14.5 x 12mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    Wurth Elektronik
    51 μH
    WE-SLM
    2500 Ω
    100 KHz
    2 x 0.32Ω
    400 mA
    6 x 3.3 x 3.3mm
    -40 → +125 °C
    -
    -
    Surface Mount
    80V
    Surface Mount
    -
    KEMET
    6.3 mH
    SCF
    -
    40 MHz
    10.91mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Wurth Elektronik
    3 x 100 μH
    WE-SL2
    -
    1 KHz
    3 x 0.45Ω
    450 mA
    9.2 x 6.6 x 2.5mm
    -40°C → +125°C
    -
    -
    Surface Mount
    80V
    Surface Mount
    -
    Murata
    -
    DLW
    120 Ω
    100 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TDK
    100 μH
    ACT
    5100 Ω
    10 MHz
    1.5Ω
    150 mA
    3.9 x 2.5 x 2.5mm
    -55°C → +150°C
    2
    -
    Surface Mount
    80V
    Surface Mount
    1210 (3225M)
    KEMET
    67 μH
    HHBC
    -
    100 kHz
    67.8mΩ
    2 A
    17 (Dia.) x 9.6mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    TRACOPOWER
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    15.4 mH
    SSRH7HS-M
    -
    10 kHz
    0.63Ω
    0.7 A
    18 x 14.5 x 12mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    TDK
    22 μH
    ACT
    500 mΩ
    10 MHz
    0.5Ω
    250 mA
    3.2 x 2.5 x 2.5mm
    -55°C → +150°C
    2
    -
    Surface Mount
    80V
    Surface Mount
    1210 (3225M)
    Wurth Elektronik
    245 pH
    WE-MK
    2 Ω
    100 MHz
    2.5Ω
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TDK
    33.7 μH
    ACM
    1000 Ω
    100 MHz
    14mΩ
    6 A
    12 x 11 x 6mm
    -40°C → +85°C
    2
    -
    Surface Mount
    80V
    Surface Mount
    1211
    Wurth Elektronik
    2 x 10 mH
    WE-LF
    65 mΩ
    10 KHz
    2 x 0.155Ω
    3 A
    33.5 (Dia.) x 20mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    -
    -
    Bourns
    10.4 μH
    SRF7035A
    1300 Ω
    100 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    1.5 mH
    SCF
    -
    40 MHz
    8.7mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    8 mH
    SU-9V
    -
    1 KHz
    200 mA
    17 x 11 x 17mm
    -25°C → +80°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    KEMET
    11.8 mH
    SCF
    -
    40 MHz
    21.35mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Results per page