Common Mode Chokes | CM Choke Filters | RS
Recently searched

    Common Mode Chokes

    Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.

    RS have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.

    Why use common mode chokes?

    Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.

    Things to consider before purchasing a common mode choke:

    • Impedance
    • Frequency bandwidth
    • Current handling

    Typical Applications include:

    Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:

    • Data storage systems
    • Digital video camera
    • Industrial systems
    • Professional audio

    1420 Products showing for Common Mode Chokes

    Abracon
    -
    ACMP
    1000 Ω
    100 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Wurth Elektronik
    2 x 1 mH
    WE-CMBHV
    -
    10 KHz
    2 x 5.5mΩ
    18.5 A
    41.5 x 23 x 39.5mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    KEMET
    220 μH
    SCF
    -
    40 MHz
    0.65mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Murata
    -
    DLW5ATH
    500 Ω
    100 MHz
    0.034Ω
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    59.6 mH
    SSRH7H-M
    -
    10 kHz
    2.02Ω
    400 mA
    18 x 14.5 x 12mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    KEMET
    4.3 mH
    SSRH7H-M
    -
    10 kHz
    0.14Ω
    1.5 A
    18 x 14.5 x 12mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    KEMET
    9.2 mH
    SSRH
    -
    10 kHz
    0.079Ω
    3 A
    25.5 x 20 x 31mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    2 x 1 mH
    WE-CMBHV
    -
    10 KHz
    2 x 5.5mΩ
    20.5 A
    46.5 x 28 x 44.5mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    -
    WE-TEFA
    131 (1 Turn) Ω, 564 (2 Turn) Ω
    100 MHz
    -
    -
    16.5 Dia. x 16mm
    -55°C → +140°C
    -
    AEC-Q200
    -
    -
    -
    -
    KEMET
    81 μH
    SHBC
    -
    100 kHz
    24.7mΩ
    6 A
    30 (Dia.) x 15.7mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    EPCOS
    51 μH
    B82790C0/S0
    0.14 Ω
    50 Hz, 60 Hz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    74.5 mH
    SSR10VS
    -
    10 kHz
    2.5Ω
    400 mA
    23.5 x 13 x 21mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Bourns
    100 μH
    SRF4530A
    7.5 kΩ
    100 kHz
    1.5Ω
    0.20 A
    4.5 x 3.2mm
    -55°C → +150°C
    -
    AEC-Q200
    Surface Mount
    -
    Surface Mount
    -
    KEMET
    51 μH
    HHBC
    -
    100 kHz
    28mΩ
    5 A
    26 (Dia.) x 12.4mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    20000 μH
    WE-SL2 SMT
    50 kΩ
    10 kHz
    2.6Ω
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    3 mH
    SC-J
    -
    100 KHz
    30mΩ
    10 A
    34 x 24 x 33mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Bourns
    1 mH
    DR331
    -
    100 KHz
    0.40Ω
    0.5 A
    7.3 x 5.4 x 4.7mm
    -40°C → +135°C
    -
    -
    Axial
    -
    Solder Pad
    -
    KEMET
    900 μH
    SCF
    -
    40 MHz
    1.84mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    9.7 mH
    SSR10H
    -
    10 kHz
    0.27Ω
    1.3 A
    22 x 18 x 13.5mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Abracon
    -
    ACMP-9050
    2200 Ω
    100 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Results per page