3M Scotch-Brite Silicon Carbide Sanding Disc, 115mm, Extra Coarse Grade, Scotch-Brite, 1 in pack

The Scotch-Brite™ Clean and Strip disc is a surface conditioning disc that combines a long lasting abrasive and the Roloc™ quick change out system. The non-woven disc uses silicon carbide mineral abrasive offering a continuous fast cutting action and consistency. The fibres use resin which will dissolve and break down over time, allowing them to stay strong and heat resistant. Suitable for removing paint and rust from seams, doors, moulding, welds and other tight areas.

Depressed-centre with 22mm bore
Work piece will not be contaminated by the abrasive material
Coarse grade material resists clogging
Maximum speed 10000 rpm
Suitable for portable angle grinders

The unique construction of the Scotch-Brite™ disc is made up of non-woven fibres and silicon carbide abrasive making it tough and durable. The extra course (XCS) works to remove unwanted corrosion and blemishes from a variety of materials. It combines strands, resin and abrasive to form a thick open web.

The Scotch Brite™ surface conditioning disc allows for easy adaptation to a profiled surface. It has been designed to last longer than wire brushes and other abrasive discs. The abrasive standards continually break down which reveal fresh abrasive for consistency and superior cut performance.

• Removes paint, rust and quickly without compromising the geometry of the workpiece
• Load resistant material resists clogging for consistent cutting action
• Smear resistant to minimise cleaning of the work surface
• Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a fine finish without gouging the workpiece
• Roloc™ attachment system provides easy disc change out for multi-step finishing processes

The disc is capable of:

The shank can be connected to can fit into power drills, angle grinders, air grinders and other power tools.

Non-woven discs provide a uniformed and consistent performance throughout its lifetime. They are flexible to allow the material to adapt and conform to irregular surfaces. the open construction allows for air circulation for cool operation and reduces the potential for burning.

Speed through sanding jobs with this 3M abrasive disc. With its extra coarse edges, it cuts deeply to strip away stubborn paint patches without pausing for breath. Rough spots pose no issue, as the tool's silicon carbide abrasive breaks down evenly for a smooth finish every time. Covering corroded surfaces is a breeze thanks to the product's broad 115mm diameter. As a non-woven disc, it flexes to fit around awkward edges to ensure effective cutting across your whole workpiece.

• Heat and loading-resistant, providing long-lasting cutting
• Slots directly onto a power tool for quick installation
• Maximum speed of 10,000rpm to power through intense cleaning jobs

• Paint preparation
• Construction industry
• Automotive body shops

Yes, this disc's non-woven design means it works a treat for wet and dry jobs, giving you versatile cutting.