Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Microchip
	Maximum Data Rate	8Mbps
	Number of Transceivers	1
	IC Type	CAN Transceiver IC
	Standard Supported	CAN, ISO 11898-2, ISO 11898-5, ISO/DIS11898-2
	Maximum Supply Current	70 mA
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	8
	Dimensions	4.9 x 3.9 x 1.5mm
	Length	4.9mm
	Width	3.9mm
	Height	1.5mm
	Maximum Operating Supply Voltage	5.5 V
	Minimum Operating Supply Voltage	4.5 V
	Maximum Operating Temperature	+125 °C
	Automotive Standard	AEC-Q100
	Minimum Operating Temperature	-40 °C

	Select all
	Brand Microchip
	Maximum Data Rate 8Mbps
	Number of Transceivers 1
	IC Type CAN Transceiver IC
	Standard Supported CAN, ISO 11898-2, ISO 11898-5, ISO/DIS11898-2
	Maximum Supply Current 70 mA
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 8
	Dimensions 4.9 x 3.9 x 1.5mm
	Length 4.9mm
	Width 3.9mm
	Height 1.5mm
	Maximum Operating Supply Voltage 5.5 V
	Minimum Operating Supply Voltage 4.5 V
	Maximum Operating Temperature +125 °C
	Automotive Standard AEC-Q100
	Minimum Operating Temperature -40 °C

Datasheet

COO (Country of Origin):: US

The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements
Optimized for CAN FD at 2, 5 and 8 Mbps Operation
Maximum propagation delay: 120 ns
Loop delay symmetry: ±10% (2 Mbps)
Wake-up on CAN activity, 3.6 μs filter time
Very Low Standby Current (4 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An unpowered node or brown-out event will not load the CAN bus
Device is unpowered if VDD or VIO drop below its POR level
Detection of Ground Fault.

Units	Per unit	Per Tube*
100 - 400	$1.422	$142.20
500 +	$1.375	$137.50

Microchip MCP2542FD-E/SN, CAN Transceiver 8Mbps CAN, ISO 11898-2, ISO 11898-5, ISO/DIS11898-2, 8-Pin SOIC

FREE delivery for orders over $60.00 ex GST

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Related links