Common Mode Chokes | CM Choke Filters | RS
Recently searched

    Common Mode Chokes

    Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.

    RS have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.

    Why use common mode chokes?

    Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.

    Things to consider before purchasing a common mode choke:

    • Impedance
    • Frequency bandwidth
    • Current handling

    Typical Applications include:

    Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:

    • Data storage systems
    • Digital video camera
    • Industrial systems
    • Professional audio

    1423 Products showing for Common Mode Chokes

    Murata
    -
    DLP11S
    90 Ω
    100 MHz
    1.5Ω
    150 mA
    1.25 x 1 x 0.82mm
    -40 → +85 °C
    -
    -
    Surface Mount
    -
    Solder Pad
    0504
    Murata
    -
    DLW5ATH
    1100 Ω
    100 MHz
    0.056Ω
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    47.5 mH
    SSR10H
    -
    10 kHz
    1.3Ω
    600 mA
    22 x 18 x 13.5mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    2 x 51 μH
    WE-SL2
    -
    1 KHz
    2 x 0.16Ω
    1 A
    9.2 x 6 x 5mm
    -40°C → +125°C
    -
    -
    Surface Mount
    80V
    Surface Mount
    -
    Wurth Elektronik
    150 μH
    WE-FI
    -
    -
    -
    5.4 A
    -
    -
    -
    -
    -
    -
    -
    -
    Wurth Elektronik
    2 μH
    WE-SD
    -
    -
    -
    5 A
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    104 μH
    PHBC
    -
    100 kHz
    10.4mΩ
    20 A
    49.5 (Dia.) x 25.8mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    2 μH
    WE-SD
    -
    -
    -
    2.5 A
    -
    -
    -
    -
    -
    -
    -
    -
    TRACOPOWER
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    47 mH
    SSRH
    -
    10 kHz
    0.327Ω
    1.6 A
    25.5 x 20 x 31mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    900000 μH
    DKIV-1
    -
    0.91 MHz
    5.7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    TDK
    -
    ACM
    1000 Ω
    100 MHz
    14mΩ
    6 A
    12 x 11 x 6mm
    -40°C → +85°C
    2
    -
    Surface Mount
    80V
    Surface Mount
    1211
    KEMET
    13 mH
    SC
    -
    10 KHz
    115mΩ
    2 A
    15 x 12 x 15mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    131 nH
    WE-CNSA
    90 Ω
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    13 mH
    SC
    -
    10 KHz
    115mΩ
    2 A
    15 x 12 x 15mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    TDK
    1.4 μH
    ACM
    700 Ω
    100 MHz
    10mΩ
    5 A
    9 x 7 x 4.5mm
    -40°C → +85°C
    2
    -
    Surface Mount
    80V
    Surface Mount
    9070
    KEMET
    5.6 mH
    SSHB-21H
    -
    10 kHz
    100mΩ
    2.5 A
    26 x 23 x 15.5mm
    -25°C → +120°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    Schurter
    500000 μH
    DKIV-1
    -
    1.26 MHz
    2.7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    Schurter
    4 mH
    DKIH-4
    -
    4.8 MHz
    4.33mΩ
    12 A
    58 (Dia.) x 31mm
    -40°C → +100°C
    -
    -
    Flange Mount
    760V
    Through Hole
    -
    Murata
    -
    DLW5BT
    1000 Ω
    100 MHz
    34mΩ
    2 A
    5 x 5 x 2.35mm
    -40°C → +85°C
    -
    -
    Surface Mount
    -
    Solder Pad
    2020
    Results per page