Common Mode Chokes | CM Choke Filters | RS
Recently searched

    Common Mode Chokes

    Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.

    RS have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.

    Why use common mode chokes?

    Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.

    Things to consider before purchasing a common mode choke:

    • Impedance
    • Frequency bandwidth
    • Current handling

    Typical Applications include:

    Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:

    • Data storage systems
    • Digital video camera
    • Industrial systems
    • Professional audio

    1410 Products showing for Common Mode Chokes

    Bourns
    2 x 1.8 mH
    04770
    -
    -
    0.008Ω
    13
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    174 μH
    PHBC
    -
    100 kHz
    11.8mΩ
    20 A
    57.6 (Dia.) x 30.9mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    TDK-Lambda
    -
    RSEV
    -
    60 Hz
    110mΩ
    6 A
    85 x 39 x 30mm
    -25°C → +85°C
    -
    -
    DIN Rail
    250V
    Screw
    -
    KEMET
    1.3 mH
    SSHB21HS
    -
    10 kHz
    0.06Ω
    3 A
    26 x 23 x 15.5mm
    -25°C → +130°C
    -
    -
    Through Hole
    250V
    Solder Pad
    -
    Abracon
    200 μH
    ACMS
    -
    100 KHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    3 mH
    SC-G
    -
    100 KHz
    85mΩ
    2 A
    17.5 x 14 x 17.5mm
    -25°C → +105°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    6.5 mH
    DKIH-4
    -
    3.2 MHz
    8mΩ
    10 A
    58 (Dia.) x 31mm
    -40°C → +100°C
    -
    -
    Flange Mount
    760V
    Through Hole
    -
    Wurth Elektronik
    2 x 2.2 mH
    WE-LF
    100 mΩ
    10 KHz
    2 x 0.1Ω
    2 A
    18 (Dia.) x 13mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    -
    -
    Bourns
    2 x 2.7 mH
    04770
    -
    -
    0.0104Ω
    11
    -
    -
    -
    -
    -
    -
    -
    -
    Murata
    -
    DLW5ATH
    500 Ω
    100 MHz
    0.056Ω
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    174 μH
    SHBC
    -
    100 kHz
    11.8mΩ
    20 A
    57.6 (Dia.) x 30.9mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    EPCOS
    47 mH
    B82793C0
    24 kΩ
    50/60 Hz
    3.7Ω
    100 mA
    7.1 x 6 x 4.8mm
    -40°C → +125°C
    1
    AEC-Q200
    Surface Mount
    42 V ac, 80 V dc
    Solder Pad
    -
    Bourns
    7 μH
    SRF7035A
    700 Ω
    100 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    TDK
    730 nH
    ACM
    360 Ω
    100 MHz
    500mΩ
    220 mA
    2 x 1.2 x 1.3mm
    -40°C → +85°C
    2
    -
    Surface Mount
    50V
    Surface Mount
    2012
    Wurth Elektronik
    2 x 700 μH
    WE-CMBHV
    -
    10 KHz
    2 x 3.8mΩ
    21.5 A
    42.5 x 23 x 39.5mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    KEMET
    91 mH
    SSR10V
    -
    10 kHz
    2.8Ω
    400 mA
    23.5 x 13 x 21mm
    -25°C → +120°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Murata
    -
    DLM0NS
    90 Ω
    100 MHz
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    152 μH
    HHBC
    -
    100 kHz
    20.4mΩ
    12 A
    41.2 (Dia.) x 20.4mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    450000 μH
    DKIV-1
    -
    0.5 MHz
    1.7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    10 μH
    SC-D
    -
    100 KHz
    8mΩ
    20 A
    34 x 23 x 34mm
    -25°C → +105°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Results per page