Potentiometers

What is a potentiometer?



A potentiometer is a variable resistor. Potentiometers enable you to regulate and change the current flowing through a circuit. Potentiometers can also be called pots or potmeters.



Potentiometers have two terminals that are fixed to a resistive element (the track). The resistive element is typically wirewound or made from carbon, cermet or conductive plastic. The third terminal is connected to the wiper, which is a sliding contact. As the wiper moves along the track, the resistance changes and the current flowing through the circuit changes.



Types of potentiometer



Rotary potentiometers are easily controlled by turning a spindle or a knob. Rotary potentiometers can be single turn or multiturn.



Slide potentiometers are also known as slider potentiometers or fader potentiometers. To use a slide potentiometer, it’s simply a case of sliding a fader along a straight track to change the resistance.



Trimmer potentiometers, sometimes called trimpots, are used to calibrate and fine-tune circuits and can be mounted straight onto a PCB (printed circuit board). Trimmer potentiometers are easy to adjust with a screwdriver.



String potentiometers (or string pots) take movement and transform it into an electrical signal.



Membrane potentiometers are completely flat. Membrane potentiometers change their resistance when pressure is applied to the membrane.



Do I need a potentiometer with a linear or logarithmic taper?



The taper you need for your potentiometer depends on the intended application.



For potentiometers with a linear taper, the resistance between one end of the track and the wiper varies at a constant rate. If you turn the potentiometer halfway or slide the fader halfway along the track, the resistance will be half of the total resistance. Linear taper potentiometers are typically used in applications such as light dimmer switches.



For logarithmic taper potentiometers, the resistance does not vary at a constant rate. The level of resistance moves exponentially up or down. A potentiometer that has been turned or moved halfway along its track, will not produce resistance that is half the total resistance. Logarithmic potentiometers are commonly used for audio applications.



What is the difference between a potentiometer and a rheostat?



The key difference is the number of terminals that each device has. Potentiometers have three terminals while rheostats only have two terminals.



Looking for peripherals for your potentiometer?



Potentiometer Knobs

Potentiometer Accessories

Potentiometer Mounting Nuts

...
Read more Read less

Filters

Viewing 61 - 80 of 1904 products
Results per page
Description Price Maximum Resistance Potentiometer Type Number of Turns Number of Gangs Mounting Type Power Rating Shaft Diameter Electrical Taper Mounting Hole Diameter Element Material Termination Style Tolerance Series Shaft Length
RS Stock No. 842-7208
BrandRS PRO
$315.61
Each
units
10kΩ Linear - 1 Spring Return - - Linear - Conductive Plastic - ±20% WT22 -
RS Stock No. 842-7078
BrandRS PRO
$9.58
Each
units
100Ω Rotary 1 1 Panel Mount 1W 6 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7138
BrandRS PRO
$16.78
Each
units
1kΩ Rotary - 1 Panel Mount 1W 6 mm Linear - Conductive Plastic Solder ±20% NP21 18mm
RS Stock No. 842-7135
BrandRS PRO
$11.90
Each
units
2kΩ Rotary 1 1 Panel Mount 0.5W 3.18 mm Linear - Conductive Plastic Solder ±20% P12 19mm
RS Stock No. 173-0737
BrandRS PRO
$5.968
Each (In a Box of 50)
units
10kΩ - 1 - Panel Mount 3W 6.35 mm - - Wirewound Solder ±10% P40 68mm
RS Stock No. 842-7002
BrandRS PRO
$9.34
Each
units
10kΩ Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7150
BrandRS PRO
$67.63
Each
units
1kΩ Rotary 1 1 Servo Mount 3W 6 mm Linear - Wirewound Solder ±10% 40WW 15mm
RS Stock No. 170-5321
BrandRS PRO
$85.467
Each (In a Box of 100)
units
50kΩ Linear 1 4 Panel Mount 1.5W 6.35 mm Linear - - Solder Lug ±10% CLR4000 -
RS Stock No. 173-0766
BrandRS PRO
$66.619
Each (In a Box of 50)
units
1kΩ - 1 - Servo Mount 3W 6 mm - - Wirewound Solder ±10% 40WW 15mm
RS Stock No. 842-7012
BrandRS PRO
$9.34
Each
units
2.5kΩ Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7071
BrandRS PRO
$10.47
Each
units
50Ω Rotary 1 1 Panel Mount 1W 6 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0729
BrandRS PRO
$4.34
Each (In a Box of 50)
units
25Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0733
BrandRS PRO
$4.34
Each (In a Box of 50)
units
50Ω - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7113
BrandRS PRO
$29.95
Each
units
1kΩ Rotary 1 1 Bushing Mount 1W 6.35 mm Linear - Conductive Plastic Solder ±20% NP22 22mm
RS Stock No. 173-0721
BrandRS PRO
$4.34
Each (In a Box of 50)
units
50Ω - 1 - Panel Mount 1W 6 mm - - Wirewound Solder ±10% P25 25mm
RS Stock No. 842-7065
BrandRS PRO
$9.34
Each
units
10Ω Rotary 1 1 Panel Mount 1W 6.35 mm Linear - Wirewound Solder ±10% P25 25mm
RS Stock No. 173-0760
BrandRS PRO
$14.973
Each (In a Box of 50)
units
10kΩ - 1 - Panel Mount 1W 6.35 mm - - Wirewound Solder ±20% P25 22mm
RS Stock No. 173-0751
BrandRS PRO
$12.369
Each (In a Box of 50)
units
5kΩ Rotary - - - 0.5W 5 mm - - Conductive Plastic Solder ±20% NP24HS -
RS Stock No. 173-0765
BrandRS PRO
$34.557
Each (In a Box of 50)
units
10kΩ - - - - - - Linear - Conductive Plastic Solder Tab ±50% 149703 25mm
RS Stock No. 812-831
BrandRS PRO
$115.74
Each
units
2.5kΩ Rotary 1 4 Panel Mount 1.5W 6.35 mm Linear - Wirewound Solder Lug ±10% CLR4000 -
Related Products
The max. tightening torque 0.50Nm (248-8 series) must ...
Description:
The max. tightening torque 0.50Nm (248-8 series) must not be exceeded. Panel and PCB mountable. Space saving short body (7.6mm)Lightweight. Fully insulated body and bush. Supplied with metal lock washer and nut.
Brought to you by RS PRO, a series ...
Description:
Brought to you by RS PRO, a series of rotary potentiometers suitable for various applications. Widely used within electronics, each model can be mounted within various devices or even on PCB applications. These particular models have a linear taper and ...
Bourns 91 Series are single turn, rotary linear ...
Description:
Bourns 91 Series are single turn, rotary linear potentiometers. Features and Benefits:Available in various pin-out configurations. One piece shaft and rotor assembly. Panel and PCB mountable. Conductive plastic resistance element. Linear and audio (log) output track options. Long mechanical life ...
The 380 series from Honeywell are precision made ...
Description:
The 380 series from Honeywell are precision made potentiometers. 2 W conductive platic potentiometer offering low contact resistance variation and a long rotational life. The 380 series is cost-effective and have a wide range of resistance values. Suitable for use ...