Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2157 Products showing for Linear Motion

Sort by
1 of 108
In Stock
RS PRO Guide Block HGH Series, 27.1 kN Dynamic Load
  • RS stock no. 360-825
Subtotal (1 unit)
R 2 322,50(exc. VAT)
R 2 322,50/unit
In Stock
Bosch Rexroth 400 mm Long Steel Closed Bush Shaft, 6 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS stock no. 724-3399
  • Mfr. Part No. R100000600,400mm
Subtotal (1 unit)
R 279,49(exc. VAT)
R 279,49/unit
In Stock
Bosch Rexroth R1605 Series, R987261838, Linear Guide Rail 15 mm width 160 mm Length
  • RS stock no. 409-684
  • Mfr. Part No. R987261838
Subtotal (1 unit)
R 2 097,48(exc. VAT)
R 2 097,48/unit
Currently unavailable
HepcoMotion W1X Guide Wheel with 19.55 mm OD
  • RS stock no. 259-0094
  • Mfr. Part No. W1X
Subtotal (1 unit)
R 728,81(exc. VAT)
R 728,81/unit
In Stock
THK Linear Guide Carriage SRS15MUUC1(GK) SRS Series, 6.66 kN Dynamic Load
  • RS stock no. 217-5243
  • Mfr. Part No. SRS15MUUC1(GK)
Subtotal (1 unit)
R 1 667,47(exc. VAT)
R 1 667,47/unit
In Stock
THK SHS25 Series, SHS25-2500L(GK), Linear Guide Rail 25 mm width 2500 mm Length
  • RS stock no. 619-883
  • Mfr. Part No. SHS25-2500L(GK)
Subtotal (1 unit)
R 16 115,91(exc. VAT)
R 16 115,91/unit
In Stock
IKO Nippon Thompson Slewing Ring with 70 mm OD
  • RS stock no. 175-3619
  • Mfr. Part No. CRBFV2012ATUUT1
Subtotal (1 unit)
R 4 419,78(exc. VAT)
R 4 419,78/unit
In Stock
ABB 250 mm Long Supported Shaft, 6 mm Shaft Diam.
  • RS stock no. 289-1576
  • Mfr. Part No. 1SCA101660R1001
Subtotal (1 unit)
R 80,05(exc. VAT)
R 80,05/unit
In Stock
Bosch Rexroth 800 mm Long Steel Closed Bush Shaft, 16 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS stock no. 724-3403
  • Mfr. Part No. R100001600,800mm
Subtotal (1 unit)
R 924,86(exc. VAT)
R 924,86/unit
In Stock
NSK Linear Guide Block NAS20ALZ-L NS Series, 2980 N Dynamic Load
  • RS stock no. 621-024
  • Mfr. Part No. NAS20ALZ-L
Subtotal (1 unit)
R 992,34(exc. VAT)
R 992,34/unit
In Stock
Ewellix Makers in Motion 300 mm Long Steel Closed Bush Shaft, 4 mm Shaft Diam., Hardness 64 HRC, h6 Tolerance
  • RS stock no. 399-4481
  • Mfr. Part No. LJM4X300ESSC2
Subtotal (1 unit)
R 812,86(exc. VAT)
R 812,86/unit
In Stock
Igus W Series, WS-25-120, 1500mm, Linear Guide Rail 120 mm width 1.5 m Length
  • RS stock no. 778-2670
  • Mfr. Part No. WS-25-120, 1500mm
Subtotal (1 unit)
R 13 029,87(exc. VAT)
R 13 029,87/unit
In Stock
Bosch Rexroth Guide Block R165121320 R16 Series, 28.6 kN Dynamic Load
  • RS stock no. 246-9274
  • Mfr. Part No. R165121320
Subtotal (1 unit)
R 3 679,53(exc. VAT)
R 3 679,53/unit
In Stock
ABB 109 mm Long Supported Shaft, 6 mm Shaft Diam.
  • RS stock no. 289-1575
  • Mfr. Part No. 1SCA101652R1001
Subtotal (1 unit)
R 45,03(exc. VAT)
R 45,03/unit
In Stock
Bosch Rexroth R060202010 Bearing with 32 mm OD
  • RS stock no. 489-4017
  • Mfr. Part No. R060202010
Subtotal (1 unit)
R 1 157,54(exc. VAT)
R 1 157,54/unit
In Stock
Igus Slewing Ring with 80 mm OD
  • RS stock no. 778-2695
  • Mfr. Part No. PRT-01-20
Subtotal (1 unit)
R 3 762,76(exc. VAT)
R 3 762,76/unit
In Stock
Ewellix Makers in Motion 1 m Long Steel Closed Bush Shaft, 25 mm Shaft Diam., Hardness 64 HRC, h6 Tolerance
  • RS stock no. 285-0403
  • Mfr. Part No. LJM25X1000ESSC2
Subtotal (1 unit)
R 2 350,17(exc. VAT)
R 2 350,17/unit
In Stock
Bosch Rexroth R060201610 Bearing with 26 mm OD
  • RS stock no. 489-4001
  • Mfr. Part No. R060201610
Subtotal (1 unit)
R 1 020,33(exc. VAT)
R 1 020,33/unit
In Stock
THK Linear Guide Carriage SSR15XW1SS(GK) SSR-XW Series, 14.7 kN Dynamic Load
  • RS stock no. 730-0060
  • Mfr. Part No. SSR15XW1SS(GK)
Subtotal (1 unit)
R 2 359,70(exc. VAT)
R 2 359,70/unit
In Stock
Igus N Series, NS-01-17-300, Linear Guide Rail 17 mm width 300 mm Length
  • RS stock no. 448-5433
  • Mfr. Part No. NS-01-17-300
Subtotal (1 unit)
R 235,15(exc. VAT)
R 235,15/unit
1
2
3
108
Results per page

Related links